Feiyu-tech FY-DOS Manuel d'utilisateur télécharger pdf (Page 16)

Guilin Feiyu Electronic Technology Co., Ltd

Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: service@feiyu-tech.com Page 16

(2)Gimbal Gain

The default Gimbal Gain:Roll 50,Pitch 50.

Under the condition of servo no rotation, you should control the camera gimbal with

RC stick. If the servo shaking when the stick in the neutral position, that’s indicates the

sensitivity is too big. As a result, you should slowly decrease(10% -20% each time)

corresponding direction Gimbal Gain, until the shaking situation disappear.If the camera

gimbal go back to Neutral is too soft, As a result, you should slowly increase(10% -20%

each time) corresponding direction Gimbal Gain

(3)Gimbal Neutral

The default Gimbal Neutral is 1520.

Power on and put the camera gimbal into level position,observe the servos position.If

the servos is not in the Neutral value,please through adjust the to corresponding servos

Gimbal Neutral to make them into Neutral value position.

Adjusting method:According to corresponding servo reaction, appropriate increase or

decrease corresponding servo Gimbal Neutral.

——END——

Note: We reserve the right to change this manual at any time! And the newest edition

will be shown on our website www.feiyudz.cn.

1 2 ... 11 12 13 14 15 16

Pas de commentaire

Feiyu-tech FY-DOS Manuel d'utilisateur Page 16